Enterasys Networks 9034313-07 manual Set linkflap interval, Set linkflap action

set linkflap interval

Mode

Switch command, read‐write.

Example

This example shows how to enable the link trap monitoring on all ports.

C3(rw)->set linkflap portstate enable

set linkflap interval

Use this command to set the time interval (in seconds) for accumulating link down transitions.

Syntax

set linkflap interval port-string interval-value

Parameters

port‐string	Specifies the port(s) on which to set the link flap interval.
interval‐value	Specifies an interval in seconds. A value of 0 will set the interval to
	forever.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to set the link flap interval on port ge.1.4 to 1000 seconds.

C3(rw)->set linkflap interval ge.1.4 1000

set linkflap action

Use this command to set reactions to a link flap violation.

Syntax

set linkflap action port-string{disableInterface gensyslogentry gentrap all}

Parameters

port‐string	Specifies the port(s) on which to set the link flap action.
disableInterface	Sets the reaction as disabling the interface.
gensyslogentry	Sets the reaction as generating a syslog entry.
gentrap	Sets the reaction as generating an SNMP trap.
all	Sets the reaction as all of the above.

SecureStack C3 Configuration Guide 7-29