Enterasys Networks 9034313-07 Clear cos port-resource flood-ctrl, Set cos reference, Unicast

clear cos port-resource flood-ctrl

clear cos port-resource flood-ctrl

Use this command to clear flood control port resources to default values.

Syntax

clear cos port-resource flood-ctrl {all group-type-index{unicast multicast broadcast all [rate]}}

Parameters

all	Clear all flood control resources for all port groups.
group‐type‐index	Specifies a port group/type index. Valid entries are in the form of
	group#.port‐type.
	Valid values for group# can range from 0 to 7. Valid values for port‐type
	can range from 0 to 1, although only port type 0 is currently supported.
	For example, port group 3 would be specified as 3.0.
unicast	Clear unicast port resources for the specified port group.
multicast	Clear multicast port resources for the specified port group.
broadcast	Clear broadcast port resources for the specified port group.
all	Clear all flood control port resources for the specified port group.
rate	(Optional) Clear the data rate limiter of the specified type of port
	resource to the default (none or disabled).

Defaults

None.

Mode

Switch command, read‐write.

Example

This example clears the unicast port resource for port group 1.0 to default values.

C3(su)->clear cos port-resource flood-ctrl 1.0 unicast

set cos reference

Use this command to set the Class of Service inbound rate limiting reference configuration.

Syntax

set cos reference irl group-type-index reference rate-limitirl-index

SecureStack C3 Configuration Guide 11-31