Enterasys Networks 9034313-07 manual Clear cos reference, Should be displayed

		clear cos reference
Parameters
	irl	(Optional) Specifies that inbound rate limiting reference information
		should be displayed.
	group‐type‐index	(Optional) Specifies an inbound rate limiting port group/type index. Valid
		entries are in the form of group#.port‐type.
		Valid values for group# can range from 0 to 7. Valid values for port‐type
		can range from 0 to 1, although only port type 0 is currently supported.
		For example, port group 3 would be specified as 3.0.

Defaults

If irl is not specified, all CoS reference information is displayed.

If a specific port group is not specified, information for all port groups is displayed.

Mode

Switch command, read‐only.

Example

This example shows the Class of Service IRL references for port group 1.0. Note that not all of the 100 possible references are displayed in this output example.

C3(su)->show cos reference irl 1.0

Group Index Reference		Type	Rate Limiter
----------- ---------		----	------------
1.0	0	irl	none
1.0	1	irl	1
1.0	2	irl	none
1.0	3	irl	none
...	97	irl	none
1.0
1.0	98	irl	none
1.0	99	irl	none

clear cos reference

Use this command to clear the Class of Service inbound rate limiting reference configuration.

Syntax

clear cos reference irl {all group-type-index reference}

Parameters

irl	Specifies that IRL references are being cleared.
all	Clear all groups indexes and references.

SecureStack C3 Configuration Guide 11-33