Enterasys Networks 9034313-07 manual Assigning Ports to Policy Profiles, Set policy port

Assigning Ports to Policy Profiles

Assigning Ports to Policy Profiles

Note: Refer to Appendix A, Policy and Authentication Capacities for information about policy limits for this platform.

Purpose

To assign and unassign ports to policy profiles.

Commands

For information about...	Refer to page...
set policy port	11-15
clear policy port	11-16

set policy port

Use this command to assign ports to a policy profile.

Syntax

set policy port port-string profile-index

Parameters

port‐string	Specifies the port(s) to add to the policy profile. For a detailed description
	of possible port‐string values, refer to “Port String Syntax Used in the CLI”
	on page 7‐1.
profile‐index	Specifies the ID of the policy profile (role) to which the port(s) will be
	added. This value must match the profile‐index value assigned using the
	set policy profile command (“set policy profile” on page 11‐4) in order
	for a policy profile to be active on the specified port.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to allow Gigabit Ethernet ports 5 through 15 in slot 1 to transmit frames according to policy profile 1:

C3(su)->set policy port ge.1.5-15 1

SecureStack C3 Configuration Guide 11-15