Enterasys Networks 9034313-07 Setting User Accounts and Passwords, Optional CLI Setup Commands

Setting User Accounts and Passwords

Table 3-2 Optional CLI Setup Commands

		Refer to
Task	CLI commands	page...
Save the active configuration.	save config	3-41
Enable or disable SSH.	set ssh enable disable	26-77
Enable or disable Telnet.	set telnet {enable disable} [inbound	3-37
	outbound all]
Enable or disable HTTP	set webview {enable disable}	3-53
management (WebView).
Enable or disable SNMP port link	set port trap port-string{enable disable}	7-25
traps.
Set the per port broadcast limit	set port broadcast port-string threshold-value	7-34
Configure a VLAN.	set vlan create vlan-id	10-5
	set port vlan port-stringvlan-idmodify-egress	10-9
Set a Syslog server IP and	set logging server index ip-addr ip-addr	10-9
severity	severity severity state enable
Configure and enable a RADIUS	set radius server index ip-addr	26-7
server.	port [secret-value]{realm {management-access
	any network-access}
	set radius enable	26-7

Setting User Accounts and Passwords

Purpose

To change the switch’s default user login and password settings, and to add new user accounts and passwords.

Commands

For information about...	Refer to page...
show system login	3-3
set system login	3-4
clear system login	3-4
set password	3-5
set system password length	3-6
set system password aging	3-6
set system password history	3-7
show system lockout	3-7
set system lockout	3-8

3-2 Basic Configuration