Enterasys Networks 9034313-07 Set rmon event properties, Description, Type none log, Trap both

set rmon event properties

Table 15-3 show rmon event Output Details

Output Field	What It Displays...
Index	Index number for this event entry.
Owner	Text string identifying who configured this entry.
Status	Whether this event entry is enabled (valid) or disabled.
Description	Text string description of this event.
Type	Whether the event notification will be a log entry, and SNMP trap, both, or none.
Community	SNMP community name if message type is set to trap.
Last Time Sent	When an event notification matching this entry was sent.

set rmon event properties

Use this command to configure an RMON event entry, or to create a new event entry with an unused event index number.

Syntax

set rmon event properties index [description description] [type {none log trap both}] [community community] [owner owner]

Parameters

index	Specifies an index number for this entry. Maximum number of entries is
	100. Maximum value is 65535.
description	(Optional) Specifies a text string description of this event.
description
type none log	(Optional) Specifies the type of RMON event notification as: none, a log
trap both	table entry, an SNMP trap, or both a log entry and a trap message.
community	(Optional) Specifies an SNMP community name to use if the message
community	type is set to trap. For details on setting SNMP traps and community
	names, refer to “Creating a Basic SNMP Trap Configuration” on
	page 8‐37.
owner owner	(Optional) Specifies the name of the entity that configured this entry.

Defaults

If description is not specified, none will be applied.

If not specified, type none will be applied.

If owner is not specified, monitor will be applied.

Mode

Switch command, read‐write.

15-14 RMON Configuration