Enterasys Networks 9034313-07 manual Clear lldp port network-policy, Tag, Vid, Dscp

clear lldp port network-policy

Example

This example returns the location information ELIN value on port ge.1.1 to the default value of null.

C3(rw)->clear lldp port location-info elin ge.1.1

clear lldp port network-policy

Use this command to return LLDP network policy for a set of applications on a port or range of ports to default values.

Syntax

clear lldp port network-policy {all voice voice-signaling guest-voice guest-voice-signaling softphone-voice video-conferencing streaming-video video-signaling} {[state] [tag] [vid] [cos] [dscp]} port-string

Parameters

all	Applies command to all applications.
voice	Applies command to the voice application.
voice‐signaling	Applies command to the voice signaling application.
guest‐voice	Applies command to the guest voice application.
guest‐voice‐signaling	Applies command to the guest voice signaling application.
softphone‐voice	Applies command to the softphone voice application.
video‐conferencing	Applies command to the video conferencing application.
streaming‐video	Applies command to the streaming video application.
video‐signaling	Applies command to the video signaling application.
state	(Optional) Clears the state of advertising the application
	information being configured to disabled.
tag	(Optional) Clears the tag value of the application being configured
	to untagged.
vid	(Optional) Clears the VLAN identifier for the port to the default
	value of 1.
cos	(Optional) Clears the Layer 2 priority to be used for the application
	being configured to the default value of 0. (A value of 0 represents
	use of the default priority as defined in IEEE 802.1D.)
dscp	(Optional) Clears the DSCP value to be used to provide Diffserv
	node behavior for the application being configured to the default
	value of 0. (A value of 0 represents use of the default DSCP value
	as defined in RFC 2475.)
port‐string	Specifies the port or range of ports to be affected.

Defaults

At least one application (or all) and one policy parameter must be specified.

Mode

Switch command, read‐write.

6-34 Discovery Protocol Configuration