Enterasys Networks 9034313-07 manual Set switch movemanagement, Set switch member

set switch movemanagement

Mode

Switch command, read‐write.

Example

This example shows how to assign the name “FirstUnit” to switch unit 1 in the stack:

C3(su)->set switch description 1 FirstUnit

set switch movemanagement

Use this command to move management switch functionality from one switch to another.

Syntax

set switch movemanagement fromunit tounit

Parameters

fromunit	Specifies the unit number of the current management switch.
tounit	Specifies the unit number of the newly‐designated management switch.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to move management functionality from switch 1 to switch 2:

C3(su)->set switch movemenagement 1 2

Moving stack management will unconfigure entire stack including all interfaces. Are you sure you want to move stack management? (y/n) y

set switch member

Use this command to add a virtual member to a stack. This allows you to preconfigure a switch before the physical device is actually added to the stack.

Syntax

set switch member unit switch-id

Parameters

unit	Specifies a unit number for the switch.
switch‐id	Specifies a switch ID (SID) for the switch. SIDs can be displayed with the
	show switch switchtype command.

Defaults

None.

SecureStack C3 Configuration Guide 2-11