Enterasys Networks 9034313-07 manual Clear cos port-config, Entry, Name, Ports

clear cos port-config

Example

This example shows all inbound rate limiting port groups. Note that ports ge.1.1 through ge.1.48 were removed from the default port group 0.0 when they were added to port groups 1.0 and 2.0.

C3(su)->show cos port-config irl

Inbound Rate Limiting Port Configuration Entries

----------------------------------------------------------------------

Port Group Name		:Default
Port	Group	:0
Port	Type	:0
Assigned Ports		:none

----------------------------------------------------------------------

Port Group Name		:Users
Port	Group	:1
Port	Type	:0
Assigned Ports		:ge.1.1-46

----------------------------------------------------------------------

Port Group Name		:Uplink
Port	Group	:2
Port	Type	:0
Assigned Ports		:ge.1.47-48

----------------------------------------------------------------------

clear cos port-config

Use this command to clear CoS port groups or assigned ports.

Syntax

clear cos port-config {irlflood-ctrl} {all group-type-index[entry] [name] [ports]}

Parameters

irl	Clear an IRL port group configuration.
flood‐ctrl	Clear a flood control port group configuration.
all	Clear all inbound rate limiting port‐config non‐default entries.
group‐type‐index	Delete a specific port group or group name, or clear the ports from that
	group. Valid entries are in the form of group#.port‐type.
	Valid values for group# can range from 0 to 7. Valid values for port‐type
	can range from 0 to 1, although only port type 0 is currently supported.
	For example, port group 3 would be specified as 3.0.
entry	Delete this non‐default inbound rate limiter entry.
name	Clear the administratively assigned textual description of this port group
	entry to its default.
ports	Clear the ports assigned to this group to its default.

Defaults

None.

11-26 Policy Classification Configuration