Enterasys Networks 9034313-07 Set system lockout, Show system lockout Output Details, Time time

set system lockout

Parameters

None.

Defaults

None.

Mode

Switch command, super user.

Example

This example shows how to display user lockout settings. In this case, switch defaults have not been changed:

C3(su)->show system lockout

Lockout attempts: 3

Lockout time: 15 minutes.

Table 3‐3 provides an explanation of the command output. These settings are configured with the set system lockout command (“set system lockout” on page 3‐8).

Table 3-3 show system lockout Output Details

Output Field	What It Displays...
Lockout attempts	Number of failed login attempts allowed before a read-write or read-only user’s
	account will be disabled.
Lockout time	Number of minutes the default admin user account will be locked out after the
	maximum login attempts.

set system lockout

Use this command to set the number of failed login attempts before locking out (disabling) a read‐ write or read‐only user account, and the number of minutes to lockout the default admin super user account after maximum login attempts.

Syntax

set system lockout {[attempts attempts] [time time]}

Parameters

attempts attempts	Specifies the number of failed login attempts allowed before a read‐write
	or read‐only user’s account will be disabled. Valid values are 1 to 10.
time time	Specifies the number of minutes the default admin user account will be
	locked out after the maximum login attempts. Valid values are 0 to 60.

Defaults

None.

Mode

Switch command, super user.

3-8 Basic Configuration