Enterasys Networks 9034313-07 manual Set sntp poll-timeout, Clear sntp poll-timeout

set sntp poll-timeout

Example

This example shows how to clear the number of SNTP poll retries:

C3(su)->clear sntp poll-retry

set sntp poll-timeout

Use this command to set the poll timeout (in seconds) for a response to a unicast SNTP request.

Syntax

set sntp poll-timeout timeout

Parameters

timeout Specifies the poll timeout in seconds. Valid values are 1 to 30.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to set the SNTP poll timeout to 10 seconds:

C3(su)->set sntp poll-timeout 10

clear sntp poll-timeout

Use this command to clear the SNTP poll timeout.

Syntax

clear sntp poll-timeout

Parameters

None.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to clear the SNTP poll timeout:

C3(su)->clear sntp poll-timeout

SecureStack C3 Configuration Guide 14-35