Enterasys Networks 9034313-07 manual Set eapol, Clear eapol, Auth‐mode, Forced‐auth

set eapol

set eapol

Use this command to enable or disable EAPOL port‐based user authentication with the RADIUS server and to set the authentication mode for one or more ports.

Syntax

set eapol [enable disable] [auth-mode {auto forced-auth forced-unauth}port-string

Parameters

enable disable	Enables or disables EAPOL.
auth‐mode	Specifies the authentication mode as:
auto	• auto ‐ Auto authorization mode. This is the default mode and will
forced‐auth	forward frames according to the authentication state of the port. For
forced‐unauth	details on this mode, refer to Table 26‐2.
	• forced‐auth ‐ Forced authorized mode, which disables authentication
	on the port.
	• forced‐unauth ‐ Forced unauthorized mode, which filters and discards
	all frames received on the port.
port‐string	Specifies the port(s) on which to set EAPOL parameters. For a detailed
	description of possible port‐string values, refer to “Port String Syntax Used
	in the CLI” on page 7‐1.

Defaults

None.

Mode

Switch command, read‐write.

Examples

This example shows how to enable EAPOL:

C3(su)->set eapol enable

This example shows how to enable EAPOL with forced authorized mode on port ge.1.1:

C3(su)->set eapol auth-mode forced-auth ge.1.1

clear eapol

Use this command to globally clear the EAPOL authentication mode, or to clear settings for one or more ports.

Syntax

clear eapol [auth-mode][port-string]

SecureStack C3 Configuration Guide 26-23