show port mdix

show port mdix

Use this command to display the status of cable connection type configuration mode for one or more ports. Switch ports can automatically detect and configure the required cable type, either straight through (MDI) or cross‐over (MDIX), or the ports can be configured to only allow one type of cable type, either MDI or MDIX.

Syntax

show port mdix {allautoforced-automdimdix}[port-string]

Parameters

all

Display information about all ports.

auto

Display information about the ports configured to automatically

 

determine the required MDI/MDIX mode.

 

 

forced‐auto

Display information about the ports forced automatically to determine

 

the required MDI/MDIX mode.

 

 

mdi

Display information about the ports configured with MDI only mode.

 

 

mdix

Display information about the ports configured with MDIX only mode.

 

 

port‐string

(Optional) Display the selected MDI/MDIX mode only for the port or

 

ports specified.

 

 

Defaults

If port‐string is not specified, information is displayed for all ports.

Mode

Switch command, read‐only.

Example

This example displays information about ports configured for MDIX only mode.

C3(su)->show port mdix mdix

Port Number

MDIX Mode

ge.1.27-------------

------------------

MDIX

ge.1.28

MDIX

set port mdix

Use this command to configure cable connection type configuration mode for one or more ports.

Syntax

set port mdix {autoforced-automdimdix}[port-string]

Parameters

auto

Configure ports to automatically determine the required MDI/MDIX

 

mode. This is the default condition.

 

 

forced‐auto

Force ports to automatically determine the required MDI/MDIX mode.

 

 

7-20 Port Configuration

Page 188
Image 188
Enterasys Networks 9034313-07 manual Show port mdix, Set port mdix, Forced‐auto, Mdix