Apollo IMY Appendix B Specifications and Dimensions, Open Thermistor Detection Display Ululul

APPENDIX “B” - SPECIFICATIONS AND DIMENSIONS

1.DISPLAY: 4-digit with F/C indication, 0.56" (14.2 mm) high LED, minus sign displayed for negative temperatures. 6-digits for integrator/ totalizer. “Flashing” display for totalizer overflow. “ULULUL” displayed for input overload and “OLOLOL” displayed for underload (negative overload).

2.POWER REQUIREMENTS: Switch selectable 115/230 VAC, ￿10%, 50/60 Hz, 14 VA.

Isolation: 2300 Vrms for 1 min. To all inputs and outputs. Working Voltage: 300 V max., CAT II

3.CONTROLS: Three front panel push buttons for modifying alarm values and indicator set-up. Two external inputs for disabling the front panel and controlling programmable functions.

4.SIGNAL INPUT: 2-Wire, 400 Series 2,252 ohm Thermistor; or 3-wire, 700 Series Thermolinear￿ thermistor.

Max. Input Signal Voltage: ￿15 VDC.

Input Common potential with respect to earth Common: 50 V max., CAT I

5.OPEN THERMISTOR DETECTION: Display - “ULULUL”

Setpoint Outputs - Disabled (Deactivated) Serial Output - “ULULUL” in data field Integration/Totalization - Disabled Analog Output - 4 mA

6.RANGE: 400 Series -40.0￿ to ￿￿￿￿￿￿C (-40.0￿ to 257￿F￿ 700 Series -30.0￿ to 100.0￿C (-22.0￿ to 212￿F).

7.RESOLUTION: 0.1 or 1 degree.

8.ACCURACY: ￿0.2￿C (0.36￿F) ￿ 12 LSD, @ 23￿C and 10 min. warm-up.

9.READING RATE: 2.5 readings/second

10.RESPONSE TIME: 2 seconds to settle for step input (increases with programmable digital filtering)

11.NORMAL MODE REJECTION: 40 dB at 50/60 Hz (may be improved by programmable digital filtering)

12.COMMON MODE REJECTION: 120 dB, DC to 50/60 Hz

13.INTEGRATOR/TOTALIZER: Front panel button for input/total display select. External integrator/totalizer reset/enable. Programmable time-base, scale factor (0.001-999.999) and low-temp cut-out. Maximum response time 0.2 sec.

14.E1-CON & E2-CON:External remote inputs which allow activation of various functions. (Reset total, peak indicator mode, trigger mode, etc.) VIL = 0.8 VMAX; VIH = 2.0 VMIN; Response Time = 0.2 sec. Maximum.

DIMENSIONS In inches (mm)

Note: Recommended minimum clearance (behind the panel) for mounting clip installation is 2.1" (53.3) H x 5.5" (140) W.

PANEL CUT-OUT

-38-