Enterasys Networks 9034313-07 manual Clear tacacs session, Service, Read‐write, Super‐user

TACACS+ Configuration clear tacacs session

The service name and attribute‐value pairs can be any character string, and are determined by your TACACS+ server configuration.

Since a task ID is associated with each accounting session, if there is a failover to a backup server, the accounting information will still be associated with the correct session using the task ID.

Examples

This example configures the service requested by the TACACS+ client as the service name “basic.”

C3(rw)->set tacacs session authorization service basic

This example maps the read‐write access privilege level to an attribute named “priv‐lvl” with the value of 5 configured on the TACACS+ server.

C3(rw)->set tacacs session authorization read-write priv-lvl 5

This example enables TACACS+ session accounting.

C3(rw)->set tacacs session accounting enable

clear tacacs session

Use this command to return the TACACS+ session authorization settings to their default values.

Syntax

clear tacacs session authorization {[service][read-only][read-write] [super-user]}

Parameters

authorization	Clears the TACACS+ session authorization parameters.
service	Clears the TACACS+ session authorization service name to the default
	value of “exec.”
read‐only	Clears the TACACS+ session authorization read‐only attribute‐value
	pair to their default values of “priv‐lvl” and 0.
read‐write	Clears the TACACS+ session authorization read‐write attribute‐value
	pair to their default values of “priv‐lvl” and 1.
super‐user	Clears the TACACS+ session authorization super‐user attribute‐value
	pair to their default values of “priv‐lvl” and 15.

Defaults

At least one of the session authorization parameters must be specified.

Mode

Switch command, Read‐Write.

Examples

This example shows how to return the service name to the default of “exec.”

C3(rw)->clear tacacs session authorization service

This example shows how to return all the session authorization parameters to their default values.

C3(rw)->clear tacacs session authorization service read-only read-write super- user

27-8