Enterasys Networks 9034313-07 manual ‐5 provides an explanation of the command output

show ipv6 ospf database

Metric Type: 2

Metric:20

IPv6 Prefix: 2301::/64 (None)

Table 25‐5 provides an explanation of the command output.

Table 25-5 show ipv6 ospf database Output Details

Output Field	What It Displays...
Link Id	Number that uniquely identifies an LSA that a router originates
	from all other self originated LSAs of the same LS type.
Advertising Router	The Advertising Router. Is a 32 bit dotted decimal number
	representing the LSDB interface.
LS Age	Number representing the age of the link state advertisement in
	seconds.
LS Type	The format and function of the specified LSA.
LS Seq Number	Number that represents which LSA is more recent.
Checksum	Total number LSA checksum.
Lenght	Size of the LSA in bytes.
Options	Option bits in LSA header. Refer to section A.2 in RFC 2740 for
	more information. Possible values are:
	V6 — indicates status of V6 bit. If this bit is clear, the router/link
	should be excluded from IPv6 routing calculations.
	E — indicates status of E-bit. This bit describes the way AS-
	external-LSAs are flooded.
	M — indicates the status of MC-bit. This bit describes whether IP
	multicast datagrams are forwarded.
	N — indicates the status of N-bit. This bit describes the handling of
	Type-7 LSAs.
	R — indicates the status of R-bit. This bit (the `Router' bit)
	indicates whether the originator is an active router.
	D — indicates the status of DC-bit. This bit describes the router's
	handling of demand circuits.
Metric Type	Whether the route specified is external type 1 or external type 2.
Metric	The cost of using the specified router link.
IPv6 Prefix	The IPv6 route with prefix mask being displayed.

This example shows how to display OSPF database summary information.

C3(su)->router#show ipv6 ospf database database-summary

OSPF Router with ID (2.2.2.2)

Area 0.0.0.0 Database Summary	2
Router
Network	1
Inter-area Prefix	1
Inter-area Router	0
Type-7 Ext	0
Link	2

25-36 OSPFv3 Configuration