Enterasys Networks 9034313-07 manual Dhcp Snooping Commands, Set dhcpsnooping, Disabled globally

DHCP Snooping Commands

DHCP Snooping Commands

For information about...	Refer to page...
set dhcpsnooping	17-4
set dhcpsnooping vlan	17-5
set dhcpsnooping database write-delay	17-5
set dhcpsnooping trust	17-6
set dhcpsnooping binding	17-7
set dhcpsnooping verify	17-7
set dhcpsnooping log-invalid	17-8
set dhcpsnooping limit	17-9
show dhcpsnooping	17-10
show dhcpsnooping database	17-11
show dhcpsnooping port	17-11
show dhcpsnooping binding	17-12
show dhcpsnooping statistics	17-13
clear dhcpsnooping binding	17-14
clear dhcpsnooping statistics	17-14
clear dhcpsnooping database	17-14
clear dhcpsnooping limit	17-15

set dhcpsnooping

Use this command to enable or disable DHCP snooping globally.

Syntax

set dhcpsnooping {enable disable}

Parameters

enable	Enable DHCP snooping globally on the switch.
disable	Disable DHCP snooping globally on the switch.

Defaults

Disabled globally.

Mode

Switch command, read‐write.

Usage

By default, DHCP snooping is disabled globally and on all VLANs. You must enable it globally with this command, and then enable it on specific VLANs.

17-4 DHCP Snooping and Dynamic ARP Inspection