Enterasys Networks 9034313-07 manual Clear / set spantree spanguardlock

clear / set spantree spanguardlock

clear / set spantree spanguardlock

Use either of these commands to unlock one or more ports locked by the Spanning Tree SpanGuard function. When SpanGuard is enabled, it locks ports that receive BPDUs when those ports have been defined as edge (user) ports (as described in “set spantree adminedge” on page 9‐40).

Syntax

clear spantree spanguardlock port-stringset spantree spanguardlock port-string

Parameters

port‐string	Specifies port(s) to unlock. For a detailed description of possible port‐string
	values, refer to “Port String Syntax Used in the CLI” on page 7‐1.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to unlock port ge.1.16:

C3(rw)->clear spantree spanguardlock ge.1.16

show spantree spanguardtrapenable

Use this command to display the state of the Spanning Tree SpanGuard trap function.

Syntax

show spantree spanguardtrapenable

Parameters

None.

Defaults

None.

Mode

Switch command, read‐only.

Example

This example shows how to display the state of the SpanGuard trap function:

C3(ro)->show spantree spanguardtrapenable

Spanguard SNMP traps are enabled

SecureStack C3 Configuration Guide 9-29