Enterasys Networks 9034313-07 manual Clear spantree lplock, SID Locked

		clear spantree lplock
Parameters
	port‐string	(Optional) Specifies port(s) for which to display the Loop Protect lock
		status.
	sid sid	(Optional) Specifies the specific Spanning Tree(s) for which to display
		the Loop Protect lock status. Valid values are 0 ‐ 4094. If not specified,
		SID 0 is assumed.

Defaults

If no port‐string is specified, status is displayed for all ports.

If no SID is specified, SID 0 is assumed.

Mode

Switch command, read‐only.

Example

This example shows how to display Loop Protect lock status on ge.1.1:

C3(rw)->show spantree lplock port ge.1.1	, SID 0 is UNLOCKED
The LoopProtect lock status for port ge.1.1

clear spantree lplock

Use this command to manually unlock a blocked port and optionally, per SID. The default state is unlocked.

Syntax

clear spantree lplock port-string[sid sid]

Parameters

port‐string	Specifies port(s) for which to clear the Loop Protect lock.
sid sid	(Optional) Specifies the specific Spanning Tree(s) for which to clear the
	Loop Protect lock. Valid values are 0 ‐ 4094. If not specified, SID 0 is
	assumed.

Defaults

If no SID is specified, SID 0 is assumed.

Mode

Switch command, read‐only.

Example

This example shows how to clear Loop Protect lock from ge.1.1:

C3(rw)->show	spantree lplock port			ge.1.1	, SID	0	is	LOCKED
The LoopProtect		lock status for	port ge.1.1
C3(rw)->clear spantree lplock ge.1.1
C3(rw)->show	spantree lplock port			ge.1.1	, SID	0	is	UNLOCKED
The LoopProtect		lock status for	port ge.1.1

SecureStack C3 Configuration Guide 9-45