Enterasys Networks 9034313-07 manual Set spantree adminedge, Clear spantree adminedge, True false

set spantree adminedge

Mode

Switch command, read‐only.

Example

This example shows how to display the edge port status for ge.3.2:

C3(su)->show spantree adminedge port ge.3.2

Port ge.3.2 has a Port Admin Edge of Edge-Port

set spantree adminedge

Use this command to set the edge port administrative status on a Spanning Tree port.

Syntax

set spantree adminedge port-string{true false}

Parameters

port‐string	Specifies the edge port. For a detailed description of possible port‐string
	values, refer to “Port String Syntax Used in the CLI” on page 7‐1.
true false	Enables (true) or disables (false) the specified port as a Spanning Tree edge
	port.

Defaults

None.

Mode

Switch command, read‐write.

Usage

The default behavior of the edge port administrative status begins with the value set to false initially after the device is powered up. If a Spanning Tree BDPU is not received on the port within a few seconds, the status setting changes to true.

Example

This example shows how to set ge.1.11 as an edge port:

C3(su)->set spantree adminedge ge.1.11 true

clear spantree adminedge

Use this command to reset a Spanning Tree port to non‐edge status.

Syntax

clear spantree adminedge port-string

9-40 Spanning Tree Configuration