Enterasys Networks 9034313-07 manual Setting Basic Switch Properties, Usage

Setting Basic Switch Properties

Usage

Once a user account is locked out, it can only be re‐enabled by a super user with the set system login command (page 3‐4).

If the default admin super user account has been locked out, you can wait until the lock out time has expired or you can reset the switch in order to re‐enable the admin account.

Example

This example shows how to set login attempts to 5 and lockout time to 30 minutes:

C3(su)->set system lockout attempts 5 time 30

Setting Basic Switch Properties

Purpose

To display and set the system IP address and other basic system (switch) properties.

Commands

For information about...	Refer to page...
show ip address	3-10
set ip address	3-11
clear ip address	3-11
show ip protocol	3-12
set ip protocol	3-12
show system	3-13
show system hardware	3-14
show system utilization	3-15
set system utilization	3-16
clear system utilization	3-17
show system enhancedbuffermode	3-17
set system enhancedbuffermode	3-18
set system temperature	3-18
clear system temperature	3-19
show time	3-20
set time	3-20
show summertime	3-21
set summertime	3-22
set summertime date	3-22
set summertime recurring	3-23

SecureStack C3 Configuration Guide 3-9