Enterasys Networks 9034313-07 manual Clear cos settings, Show cos settings, Priority, Tos‐value

clear cos settings

Example

This example shows how to create CoS entry 8 with a priority value of 3:

C3(rw)->set cos settings 8 priority 3

clear cos settings

Use this command to clear Class of Service entry settings.

Syntax

clear cos settings cos-list{[all] [priority] [tos-value][irl-reference]}

Parameters

cos‐list	Specifies a Class of Service entry to clear.
all	Clears all settings associated with this entry.
priority	Clears the priority value associated with this entry.
tos‐value	Clears the Type of Service value associated with this entry.
irl‐reference	Clear the IRL reference associated with this entry.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to clear the priority for CoS entry 8:

C3(rw)->clear cos settings 8 priority

show cos settings

Use this command to display Class of Service parameters.

Syntax

show cos settings [cos-list]

Parameters

cos‐list (Optional) Specifies a Class of Service entry to display.

Defaults

If not specified, all CoS entries will be displayed.

Mode

Switch command, read‐only.

SecureStack C3 Configuration Guide 11-23