Enterasys Networks 9034313-07 manual Clear lacp static

		clear lacp static
key	(Optional) Specifies the new member port and LAG port aggregator
	admin key value. Only ports with matching keys are allowed to
	aggregate. Valid values are 0 ‐ 65535.
		Note: This key value must be unique. If ports other than the desired
		underlying physical ports share the same admin key value, aggregation
		will fail or undesired aggregations will form.
port‐string	Specifies the member port(s) to add to the LAG. For a detailed description
	of possible port‐string values, refer to “Port String Syntax Used in the CLI”
	on page 7‐1.

Defaults

If not specified, a key will be assigned according to the specified aggregator. For example a key of 4 would be assigned to lag.0.4.

Mode

Switch command, read‐write.

Example

This example shows how to add port ge.1.6 to the LAG of aggregator port 6:

C3(su)->set lacp static lag.0.6 ge.1.6

clear lacp static

Use this command to remove specific ports from a Link Aggregation Group.

Syntax

clear lacp static lagportstring port-string

Parameters

lagportstring	Specifies the LAG aggregator port from which ports will be removed.
port‐string	Specifies the port(s) to remove from the LAG. For a detailed description of
	possible port‐string values, refer to “Port String Syntax Used in the CLI”
	on page 7‐1.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to remove ge.1.6 from the LAG of aggregator port 6:

C3(su)->clear lacp static lag.0.6 ge.1.6

SecureStack C3 Configuration Guide 7-49