Enterasys Networks 9034313-07 manual Clear linkflap action, Set linkflap threshold

clear linkflap action

Defaults

None.

Mode

Switch mode, read‐write.

Example

This example shows how to set the link flap violation action on port ge.1.4 to generating a Syslog entry.

C3(rw)->set linkflap action ge.1.4 gensyslogentry

clear linkflap action

Use this command to clear reactions to a link flap violation.

Syntax

clear linkflap action [port-string] {disableInterface gensyslogentry gentrap all}

Parameters

port‐string	(Optional) Specifies the port(s) on which to clear the link flap action.
disableInterface	Clears the reaction as disabling the interface.
gensyslogentry	Clears the reaction as generating a syslog entry.
gentrap	Clears the reaction as generating an SNMP trap.
all	Clears the reaction as all of the above.

Defaults

If port‐string is not specified, actions will be cleared on all ports.

Mode

Switch mode, read‐write.

Example

This example shows how to clear the link flap violation action on port ge.1.4 to generating a Syslog entry.

C3(rw)->clear linkflap action ge.1.4 gensyslogentry

set linkflap threshold

Use this command to set the link flap action trigger count.

Syntax

set linkflap threshold port-string threshold-value

7-30 Port Configuration