Enterasys Networks 9034313-07 manual Clear cos port-resource irl, Unit, Rate, Type

clear cos port-resource irl

2.0-----------	--------	----	----	----------	---------------	------
	1	irl	kbps	10000	drop	none

This example displays the flood control resources configured for group 1.0.

C3(su)->show cos port-resource flood-ctrl 1.0

'?' after the rate value indicates an invalid rate value

Group	Resource	Type	Unit	Rate	Rate Limit	Action
Index	-----------	----------	----	----------	type	------
---------					---------------
1.0	ucast	flood-ctrl	pps	20	drop	none
1.0	mcast	flood-ctrl	pps	10	drop	none
1.0	bcast	flood-ctrl	pps	5	drop	none

clear cos port-resource irl

Use this command to clear inbound rate limit resources to default values.

Syntax

clear cos port-resource irl {all group-type-index[irl-index[unit] [rate]

[type]]}

Parameters

all	Clear all IRL resources for all port groups.
group‐type‐index	Specifies an inbound rate limiting port group/type index. Valid entries are
	in the form of group#.port‐type.
	Valid values for group# can range from 0 to 7. Valid values for port‐type
	can range from 0 to 1, although only port type 0 is currently supported.
	For example, port group 3 would be specified as 3.0.
irl‐index	(Optional) Inbound rate limiter resource index associated with the
	specified port group. Valid values range from 0 to 99.
unit	Clear the unit of measure for the inbound rate limiter.
rate	Clear the data rate for this inbound rate limiter.
type	Clear the action for the rate limiter.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example clears the data rate to 0 for IRL resource index 1 for group 2.0.

C3(su)->clear cos port-resource irl 2.0 1 rate

11-30 Policy Classification Configuration