clear dhcp pool hardware-address

Defaults

If no type is specified, Ethernet is assumed.

Mode

Switch command, read‐write.

Example

This example specifies 0001.f401.2710 as the Ethernet MAC address for the manual address pool named “manual1.” Alternatively, the MAC address could have be entered as 00:01:f4:01:27:10.

C3(rw)->set dhcp pool manual1 hardware-address 0001.f401.2710

clear dhcp pool hardware-address

Use this command to remove the hardware address of a DHCP client from a manual binding address pool.

Syntax

clear dhcp pool poolname hardware-address

Parameters

poolname

Specifies the name of the address pool. Pool names may be up to 31

 

characters in length.

 

 

Defaults

None.

Mode

Switch command, read‐write.

Example

This example deletes the client hardware address from the address pool named “manual1.”

C3(rw)->clear dhcp pool manual1 hardware-address

set dhcp pool host

Use this command to configure an IP address and network mask for a manual DHCP binding.

Syntax

set dhcp pool poolname host ip-address [mask prefix-length]

Parameters

poolname

Specifies the name of the address pool. Pool names may be up to 31

 

characters in length.

 

 

ip‐address

Specifies the IP address for manual binding.

 

 

16-16 DHCP Server Configuration

Page 496
Image 496
Enterasys Networks 9034313-07 manual Clear dhcp pool hardware-address, Set dhcp pool host