Enterasys Networks 9034313-07 manual Set port lacp, Aadminkey

set port lacp

Port Instance:		ge.1.12	PartnerAdminPort:		1411
ActorPort:		1411
ActorSystemPriority:		32768	PartnerOperPort:		1411
ActorPortPriority:		32768	PartnerAdminSystemPriority:		32768
ActorAdminKey:		32768	PartnerOperSystemPriority:		32768
ActorOperKey:		32768	PartnerAdminPortPriority:		32768
ActorAdminState:		-----GlA	PartnerOperPortPriority:		32768
ActorOperState:		-F----lA	PartnerAdminKey:		1411
ActorSystemID:	00-e0-63-9d-b5-87		PartnerOperKey:		1411
SelectedAggID:		none	PartnerAdminState:		--DCSGlp
AttachedAggID:		none	PartnerOperState:		--DC-Glp
MuxState:		Detached	PartnerAdminSystemID: 00-00-00-00-00-00
DebugRxState:		port Disabled	PartnerOperSystemID:	00-00-00-00-00-00

This example shows how to display summarized LACP status information for port ge.1.12:

C3(su)->show port lacp port ge.1.12			status summary
Port	Aggr	Actor System	Key:	Partner System	Key:
ge.1.12		Pri: System ID:		Pri: System ID:
	none [(32768,00e0639db587,32768),(32768,000000000000, 1411)]

This example shows how to display LACP counters for port ge.1.12:

C3(su)->show port lacp port ge.1.12 counters

Port Instance:	ge.1.12
LACPDUsRx:	11067
LACPDUsTx:	0
IllegalRx:	0
UnknownRx:	0
MarkerPDUsRx:	0
MarkerPDUsTx:	0
MarkerResponsePDUsRx:	0
MarkerResponsePDUsTx:	374

set port lacp

Use this command to set link aggregation parameters for one or more ports. These settings will determine the specified underlying physical ports’ ability to join a LAG, and their administrative state once aggregated.

Syntax

set port lacp port port-string{[aadminkey aadminkey] [aadminstate {lacpactive lacptimeout lacpagg lacpsync lacpcollect lacpdist lacpdef lacpexpire}] [aportpri aportpri] [asyspri asyspri] [enable [disable] [padminkey padminkey] [padminport padminport] [padminportpri padminportpri] [padminstate {lacpactive lacptimeout lacpagg lacpsync lacpcollect lacpdist lacpdef lacpexpire}] [padminsysid padminsysid] [padminsyspri padminsyspri]

Parameters

port port‐string	Specifies the physical port(s) on which to configure LACP. For a detailed
	description of possible port‐string values, refer to “Port String Syntax Used
	in the CLI” on page 7‐1.
aadminkey	Sets the port’s actor admin key. LACP will use this value to form an oper
aadminkey	key and will determine which underlying physical ports are capable of
	aggregating by comparing oper keys. Aggregator ports allow only
	underlying ports with oper keys matching theirs to join their LAG. Valid
	values are 1 ‐ 65535. The default key value is 32768.

7-52 Port Configuration