Enterasys Networks 9034313-07 Set spantree bridgeprioritymode, Clear spantree bridgeprioritymode

set spantree bridgeprioritymode

set spantree bridgeprioritymode

Use this command to set the Spanning Tree bridge priority mode to 802.1D (legacy) or 802.1t.

Syntax

set spantree bridgeprioritymode {8021d 8021t}

Parameters

8021d	Sets the bridge priority mode to use 802.1D (legacy) values, which are 0 ‐
	65535.
8021t	Sets the bridge priority mode to use 802.1t values, which are 0 to 61440, in
	increments of 4096. Values will automatically be rounded up or down,
	depending on the 802.1t value to which the entered value is closest.
	This is the default bridge priority mode.

Defaults

None

Mode

Switch command, read‐write.

Usage

The mode affects the range of priority values used to determine which device is selected as the Spanning Tree root as described in set spantree priority (“set spantree priority” on page 9‐17). The default for the switch is to use 802.1t bridge priority mode.

Example

This example shows how to set the bridge priority mode to 802.1D:

C3(rw)->set spantree bridgeprioritymode 8021d

clear spantree bridgeprioritymode

Use this command to reset the Spanning Tree bridge priority mode to the default setting of 802.1t.

Syntax

clear spantree bridgeprioritymode

Parameters

None.

Defaults

None.

Mode

Switch command, read‐write.

SecureStack C3 Configuration Guide 9-11