Enterasys Networks 9034313-07 manual Set switch copy-fw, Set switch description

set switch copy-fw

Examples

This example shows how to assign priority 3 to switch 5:

C3(su)->set switch 5 priority 3

This example shows how to renumber switch 5 to switch 7:

C3(su)->set switch 5 renumber 7

set switch copy-fw

Use this command to replicate the code image file from the management switch to other switch(es) in the stack.

Syntax

set switch copy-fw [destination-system unit]

Parameters

destination‐system (Optional) Specifies the unit number of unit on which to copy the

unit management image file.

Defaults

If destination‐system is not specified, the management image file will be replicated to all switches in the stack.

Mode

Switch command, read‐write.

Example

This example shows how to replicate the management image file to all switches in the stack:

C3(su)->set switch copy-fw

Are you sure you want to copy firmware? (y/n) y

Code transfer completed successfully.

set switch description

Use this command to assign a name to a switch in the stack.

Syntax

set switch description unit description

Parameters

unit	Specifies a unit number for the switch.
description	Specifies a text description for the unit.

Defaults

None.

2-10 Configuring Switches in a Stack