Enterasys Networks 9034313-07 Set port inlinepower, Admin off auto, Priority critical, High low

						set port inlinepower
C3(su)->show port inlinepower ge.2.1
Port	Type	Admin	Oper	Priority	Class	Power(W)
----	----	-----	----	--------	-----	--------
ge.2.1	wireless	auto	searching	low	0	15.4

set port inlinepower

Use this command to configure PoE parameters on one or more ports.

Syntax

set port inlinepower port-string{[admin {off auto}] [priority {critical high low}] [type type]}

Parameters

port‐string	Specifies the port(s) on which to configure PoE.
admin off auto	Sets the PoE administrative state to off (disabled) or auto (on).
priority critical	Sets the port(s) priority for the PoE allocation algorithm to critical
high low	(highest), high or low.
type type	Specifies a string describing the type of device connected to a port.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to enable PoE on port ge.3.1 with critical priority:

C3(su)->set port inlinepower ge.3.1 admin auto priority critical

SecureStack C3 Configuration Guide 5-5