Enterasys Networks 9034313-07 manual Set gvrp, Show gvrp configuration Output Details

set gvrp

Example

This example shows how to display GARP timer information on ports 1 through 10 in slot 1:

Note: For a functional description of the terms join, leave, and leaveall timers, refer to the standard IEEE 802.1Q documentation, which is not supplied with this device.

C3(su)->show garp timer ge.1.1-10

Port based GARP Configuration: (Timer units are centiseconds)

Port Number	Join	Leave	Leaveall
-----------	----------	----------	----------
ge.1.1	20	60	1000
ge.1.2	20	60	1000
ge.1.3	20	60	1000
ge.1.4	20	60	1000
ge.1.5	20	60	1000
ge.1.6	20	60	1000
ge.1.7	20	60	1000
ge.1.8	20	60	1000
ge.1.9	20	60	1000
ge.1.10	20	60	1000

Table 10‐3 provides an explanation of the command output. For details on using the set gvrp command to enable or disable GVRP, refer to “set gvrp” on page 10‐23. For details on using the set garp timer command to change default timer values, refer to “set garp timer” on page 10‐24.

Table 10-3 show gvrp configuration Output Details

Output Field	What It Displays...
Port Number	Port designation. For a detailed description of possible port-stringvalues, refer to
	“Port String Syntax Used in the CLI” on page 7-1.
Join	Join timer setting.
Leave	Leave timer setting.
Leaveall	Leavall timer setting.

set gvrp

Use this command to enable or disable GVRP globally on the device or on one or more ports.

Syntax

set gvrp {enable disable} [port-string]

Parameters

disable	Disables or enables GVRP on the device.
enable
port‐string	(Optional) Disables or enables GVRP on specific port(s). For a detailed
	description of possible port‐string values, refer to “Port String Syntax Used in
	the CLI” on page 7‐1.

Defaults

If port‐string is not specified, GVRP will be disabled or enabled for all ports.

SecureStack C3 Configuration Guide 10-23