Enterasys Networks 9034313-07 manual Clear lldp, Tx‐interval, Hold‐multiplier, Trap‐interval

clear lldp

port‐string Specifies the port or range of ports to be affected.

Defaults

None.

Mode

Switch command, read‐write.

Usage

This feature allows administrators to quickly provision LLDP end‐points via the switch. LLDP clients will use these LLDP network policy parameters for traffic originating from the end‐point.

As described in the ANSI/TIA Standards document 1057, the Network Policy TLV is “intended for use with applications that have specific real‐time network policy requirements, such as interactive voice and/or video services” and should be implemented only on direct links between network connectivity devices and endpoint devices. Refer to the ANSI/TIA Standards document 1057 for descriptions of the application types.

After you configure Network Policy TLVs, you must also configure the port to send the Network Policy TLV with the set lldp port tx‐tlv command.

Example

This example configures the voice application TLV on port ge.2.1 and then configures the port to send the Network Policy TLV.

C3(rw)->set lldp port network-policy voice state enable tag tagged vlan dot1p ge.2.1

C3(rw)->set lldp port tx-tlv med-pol ge.2.1

clear lldp

Use this command to return LLDP parameters to their default values.

Syntax

clear lldp {all tx-interval hold-multiplier trap-interval med-fast-repeat}

Parameters

all	Returns all LLDP configuration parameters to their default values,
	including port LLDP configuration parameters.
tx‐interval	Returns the number of seconds between transmissions of LLDP
	frames.to the default of 30 seconds.
hold‐multiplier	Returns the multiplier to apply to the transmit interval to determine
	the time‐to‐live value to the default value of 4.
trap‐interval	Returns the minimum time between LLSP trap transmissions to the
	default value of 5 seconds.
med‐fast‐repeat	Returns the number of fast start LLDPDUs to be sent when an LLDP‐
	MED endpoint device is detected to the default of 3.

SecureStack C3 Configuration Guide 6-31