Enterasys Networks 9034313-07 manual Set cos state

set cos state

Commands

For information about...	Refer to page...
set cos state	11-20
show cos state	11-21
clear cos state	11-21
set cos settings	11-22
clear cos settings	11-23
show cos settings	11-23
set cos port-config	11-24
show cos port-config	11-25
clear cos port-config	11-26
set cos port-resource irl	11-27
set cos port-resource flood-ctrl	11-28
show cos port-resource	11-29
clear cos port-resource irl	11-30
clear cos port-resource flood-ctrl	11-31
set cos reference	11-31
show cos reference	11-32
clear cos reference	11-33
show cos unit	11-34
clear cos all-entries	11-35
show cos port-type	11-35

set cos state

Use this command to enable or disable Class of Service.

Syntax

set cos state {enable disable}

Parameters

enable disable Enables or disables Class of Service on the switch. Default state is disabled.

Defaults

None.

Mode

Switch command, read‐write.

11-20 Policy Classification Configuration