Enterasys Networks 9034313-07 manual Clear maclock, Create, Specified MAC address and port

clear maclock

create	Establishes a MAC locking association between the specified MAC
	address and port. Create automatically enables MAC locking between the
	specified MAC address and port.
enable disable	Enables or disables MAC locking between the specified MAC address and
	port.

Defaults

None.

Mode

Switch command, read‐write.

Usage

Configuring a port for MAC locking requires globally enabling it on the switch first using the set maclock enable command as described in “set maclock enable” on page 26‐60.

Static MAC locking a user on multiple ports is not supported.

Statically MAC locked addresses will display in the show mac output (as described on page 14‐22) as address type “other” and will not remove them on link down.

Example

This example shows how to create a MAC locking association between MAC address 0e‐03‐ef‐d8‐

44‐55 and port ge.3.2:

C3(rw)->set maclock 0e-03-ef-d8-44-55 ge.3.2 create

clear maclock

Use this command to remove a static MAC address to port locking entry.

Syntax

clear maclock mac-address port-string

Parameters

mac‐address	Specifies the MAC address that will be removed from the list of static
	MACs allowed to communicate on the port.
port‐string	Specifies the port on which to clear the MAC address. For a detailed
	description of possible port‐string values, refer to “Port String Syntax Used
	in the CLI” on page 7‐1.

Defaults

None.

Mode

Switch command, read‐write.

26-62 Authentication and Authorization Configuration