Enterasys Networks 9034313-07 manual Show tacacs command, Set tacacs command

show tacacs command TACACS+ Configuration

show tacacs command

Use this command to display the status (enabled or disabled) of TACACS+ accounting or authorization on a per‐command basis.

Syntax

show tacacs command {accounting authorization}

Parameters

accounting	Display the status of TACACS+ accounting on a per‐command basis.
authorization	Display the status of TACACS+ authorization on a per‐command basis.

Defaults

None.

Mode

Switch command, Read‐Write.

Example

This example shows how to display the state of the TACACS+ client’s command authorization.

C3(rw)->show tacacs command authorization

TACACS+ command authorization state: enabled

set tacacs command

Use this command to enable or disable TACACS+ accounting or authorization on a per‐command basis.

Syntax

set tacacs command {accounting authorization} {enable disable}

Parameters

accounting	Specifies either TACACS+ accounting or authorization to be enabled or
authorization	disabled.
enable disable	Enable or disable accounting or authorization on a per‐command basis.

Defaults

None.

Mode

Switch command, Read‐Write.

Usage

In order for per‐command accounting or authorization by a TACACS+ server to take place, the command must be executed within an authorized session.

SecureStack C3 Configuration Guide 27-9