Enterasys Networks 9034313-07 manual Show ipv6 route preferences

show ipv6 route preferences

show ipv6 route preferences

This command shows the preference value associated with the type of route.

Syntax

show ipv6 route preference

Parameters

None.

Defaults

None.

Mode

Router privileged execution: C3(su)‐>router#

Router user execution: C3(su)‐>router>

Usage

Lower numbers have a greater preference. A route with a preference of 255 cannot be used to forward traffic.

The default preference value for static routes can be set with the ipv6 route distance command. The distance for a specific static route can be set with the ipv6 route command.

Note: The configuration of NSSA preferences is not supported in this release.

Example

The following example shows the output of this command.

C3(su)->router#show ipv6 route preferences	0
Local
Static	1
OSPF Intra	8
OSPF Inter	10
OSPF Ext T1	13
OSPF Ext T2	150
OSPF NSSA T1	14
OSPF NSSA T2	151

Table 22‐3 provides an explanation of the command output.

Table 22-3 show ipv6 route preferences Output Details

Output Field	What It Displays...
Local	Preference of directly-connected routes.
Static	Preference of static routes.
OSPF Intra	Preference of routes within the OSPF area.
OSPF Inter	Preference of routes to other OSPF routes that are outside of the
	area.
OSPF Ext T1	Preference of OSPF Type-1 external routes.

SecureStack C3 Configuration Guide 22-27