Enterasys Networks 9034313-07 manual Set pwa maxrequest, Set pwa portcontrol

set pwa maxrequest

Defaults

If port‐string is not specified, quiet period will be set for all ports.

Mode

Switch command, read‐write.

Example

This example shows how to set the PWA quiet period to 30 seconds for ports ge.1.5‐7:

C3(su)->set pwa quietperiod 30 ge.1.5-7

set pwa maxrequest

Use this command to set the maximum number of log on attempts allowed before transitioning the PWA port to a held state.

Syntax

set pwa maxrequests requests [port-string]

Parameters

maxrequests	Specifies the maximum number of log on attempts.
port‐string	(Optional) Sets the maximum requests for specific port(s). For a detailed
	description of possible port‐string values, refer to “Port String Syntax Used
	in the CLI” on page 7‐1.

Defaults

If port‐string is not specified, maximum requests will be set for all ports.

Mode

Switch command, read‐write.

Example

This example shows how to set the PWA maximum requests to 3 for all ports:

C3(su)->set pwa maxrequests 3

set pwa portcontrol

This command enables or disables PWA authentication on select ports.

Syntax

set pwa portcontrol {enable disable} [port-string]

SecureStack C3 Configuration Guide 26-77