Enterasys Networks 9034313-07 manual Clear dhcp pool, Set dhcp pool network

clear dhcp pool

clear dhcp pool

Use this command to delete a DHCP server pool of addresses.

Syntax

clear dhcp pool poolname

Parameters

poolname	Specifies the name of the address pool. Pool names may be up to 31
	characters in length.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example deletes the address pool named “auto1.”

C3(rw)->clear dhcp pool auto1

set dhcp pool network

Use this command to configure the subnet number and mask for an automatic DHCP address pool.

Syntax

set dhcp pool poolname network number {mask prefix-length}

Parameters

poolname	Specifies the name of the address pool. Pool names may be up to 31
	characters in length.
number	Specifies an IP subnet for the address pool.
mask	Specifies the subnet mask in dotted quad notation.
prefix‐length	Specifies the subnet mask as an integer.

Defaults

None.

Mode

Switch command, read‐write.

Usage

Use this command to configure a set of IP addresses to be assigned by the DHCP server using the specified address pool. In order to limit the scope of the addresses configured with this command, use the set dhcp exclude command on page 16‐7.

16-14 DHCP Server Configuration