Enterasys Networks 9034313-07 manual Level level, If level is not specified, none will be applied

set logging application

Parameters

mnemonic	Specifies a case sensitive mnemonic abbreviation of an application to be
	logged. This parameter will vary depending on the number and types of
	applications running on your system. To display a complete list, use the
	show logging application command as described in “show logging
	application” on page 14‐6. Sample mnemonics and their corresponding
	applications are listed in Table 14‐3 on page 14‐8.
	Note: Mnemonic values are case sensitive and must be typed as they appear in
	Table 14-3.
all	Sets the logging severity level for all applications.
level level	(Optional) Specifies the severity level at which the server will log
	messages for applications. Valid values and corresponding levels are:
	1	— emergencies (system is unusable)
	2	— alerts (immediate action required)
	3	— critical conditions
	4	— error conditions
	5	— warning conditions
	6	— notifications (significant conditions)
	7	— informational messages
	8	— debugging messages
Table 14-3Mnemonic Values for Logging Applications
Mnemonic		Application
CLIWEB		Command Line Interface and Webview management
SNMP		Simple Network Management Protocol
STP		Spanning Tree Protocol
Driver		Hardware drivers
System		Non-application items such as general chassis management
Stacking		Stacking management (if applicable)
UPN		User Personalized Networking
Router		Router

Defaults

If level is not specified, none will be applied.

Mode

Switch command, read‐write.

14-8 Logging and Network Management