Enterasys Networks 9034313-07 manual Clear spantree portadmin, Show spantree portadmin

clear spantree portadmin

Example

This example shows how to disable Spanning Tree on ge.1.5:

C3(rw)->set spantree portadmin ge.1.5 disable

clear spantree portadmin

Use this command to reset the default Spanning Tree admin status to enable on one or more ports.

Syntax

clear spantree portadmin port-string

Parameters

port‐string	Resets the default admin status on specific port(s). For a detailed
	description of possible port‐string values, refer to “Port String Syntax Used
	in the CLI” on page 7‐1.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to reset the default Spanning Tree admin state to enable on ge.1.12:

C3(rw)->clear spantree portadmin ge.1.12

show spantree portadmin

Use this command to display the status of the Spanning Tree algorithm on one or more ports.

Syntax

show spantree portadmin [port port-string]

Parameters

port port‐string	(Optional) Displays status for specific port(s). For a detailed description of
	possible port‐string values, refer to “Port String Syntax Used in the CLI”
	on page 7‐1.

Defaults

If port‐string is not specified, status will be displayed for all ports.

Mode

Switch command, read‐only.

SecureStack C3 Configuration Guide 9-35