Enterasys Networks 9034313-07 manual Clear snmp group, Show snmp community, V2c usm

clear snmp group

Mode

Switch command, read‐write.

Example

This example shows how to create an SNMP group called “anyone”, assign a user named “public” and assign SNMPv3 security to the group:

C3(su)->set snmp group anyone user public security-model usm

clear snmp group

Use this command to clear SNMP group settings globally or for a specific SNMP group and user.

Syntax

clear snmp group groupname user [security-model {v1 v2c usm}]

Parameters

groupname	Specifies the SNMP group to be cleared.
user	Specifies the SNMP user to be cleared.
security‐model v1	(Optional) Clears the settings associated with a specific security model.
v2c usm

Defaults

If not specified, settings related to all security models will be cleared.

Mode

Switch command, read‐write.

Example

This example shows how to clear all settings assigned to the “public” user within the SNMP group “anyone”:

C3(su)->clear snmp group anyone public

show snmp community

Use this command to display SNMP community names and status. In SNMPv1 and v2, community names act as passwords to remote management.

Syntax

show snmp community [name]

Parameters

name (Optional) Displays SNMP information for a specific community name.

Defaults

If name is not specified, information will be displayed for all SNMP communities.

SecureStack C3 Configuration Guide 8-13