Enterasys Networks 9034313-07 manual Set pwa ipaddress, Set pwa protocol, Chap pap

set pwa ipaddress

set pwa ipaddress

Use this command to set the PWA IP address. This is the IP address of the end station from which PWA will prevent network access until the user is authenticated.

Syntax

set pwa ipaddress ip-address

Parameters

ip‐address	Specifies a globally unique IP address. This same value must be
	configured into every authenticating switch in the domain.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to set a PWA IP address of 1.2.3.4:

C3(su)->set pwa ipaddress 1.2.3.4

set pwa protocol

Use this command to set the port web authentication protocol.

Syntax

set pwa protocol {chap pap}

Parameters

chap pap	Sets the PWA protocol to:
	•	CHAP (PPP Challenge Handshake Protocol) ‐ encrypts the username
		and password between the end‐station and the switch port.
	•	PAP (Password Authentication Protocol‐ does not provide any
		encryption between the end‐station the switch port.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to set a the PWA protocol to CHAP:

C3(su)->set pwa protocol chap

SecureStack C3 Configuration Guide 26-73