Enterasys Networks 9034313-07 manual Clear lacp, Set lacp static

clear lacp

Usage

LACP will use this value to form an oper key. Only underlying physical ports with oper keys matching those of their aggregators will be allowed to aggregate. The default admin key value for all LAG ports is 32768.

Example

This example shows how to set the LACP admin key to 2000 for LAG port 6:

C3(su)->set lacp aadminkey lag.0.6 2000

clear lacp

Use this command to clear LACP system priority or admin key settings.

Syntax

clear lacp {[asyspri] [aadminkey port-string]}

Parameters

asyspri Clears system priority.

aadminkey port‐string Resets admin keys for one or more ports to the default value of 32768.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to clear the actor admin key for LAG port 6:

C3(su)->clear lacp aadminkey lag.0.6

set lacp static

Use this command to disable or enable static link aggregation, or to assign one or more underlying physical ports to a Link Aggregation Group (LAG).

Syntax

set lacp static {disable enable} lagportstring [key] port-string

Parameters

disable enable Disables or enables static link aggregation.

lagportstring Specifies the LAG aggregator port to which new ports will be assigned.

7-48 Port Configuration