SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
V~
A
Volts Alternating Current
Amperes
no xxxx/min. | No Load Revolutions |
| per Minute (RPM) |
SPECIFIC SAFETY RULES
1.Maintain labels and nameplates on the Saw. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.Industrial applications must follow OSHA requirements.
3.Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately.
4.Do not use this tool for cutting metals or brittle materials. Do not cut dangerous materials, such as asbestos which can cause harmful dust or vapors.
5.Allow the Saw Blade to spin up to full speed before feeding wood into it. When turning it off, allow the Saw Blade to spin down and stop on its own. Do not press against the Saw Blade to stop it.
6.Never pass hands directly over the Saw Blade when cutting the workpiece. Push the workpiece into the Saw Blade, using the Push Stick (37).
7.Never attempt to remove material stuck in the moving parts of the Table Saw while it is plugged in and running.
8.Turn off theTable Saw if the woodstock is to be backed out of an uncompleted cut.
9.Always feed the woodstock into the Saw Blade and against its rotation.
10.Make sure the woodstock is supported at all times while sawing. Use a Roller Stand (not provided) with larger woodstocks if necessary.
SKU 45804 | PAGE |
