| BLADE GUARD | |
SAW BLADE (3) | ASSY. (50) | |
| ||
(not included) |
| |
RULER SUPPORT | FENCE ASSY. (75) | |
(86) | ||
|
GRADUATION
SCALE
LOCKING KNOB (167)
Fence Handle (80)
(LOCKED POSITION)
ANGLE INDICATOR
ANGLE
SCALE
SWITCH | CIRCUIT | WHEEL | |
(179) | |||
BREAKER | |||
| (170) | ||
| (178) | ||
| FIGURE M | ||
|
|
OPERATING INSTRUCTIONS
To Raise And Lower The Saw Blade:
1.When cutting, the top edge of the Saw Blade (3) should rise about 1/4” above the top edge of the workpiece.
2.To raise the height of the Saw Blade (3), unlock the Locking Knob (167) by turning it counterclockwise. Next, turn the Wheel (170) clockwise until the desired height is acquired. Then, turn the Locking Knob clockwise to lock the Saw Blade in position.
(See Figure M.)
3.To lower the height of the Saw Blade (3), unlock the Locking Knob (167) by turning it counterclockwise. Next, turn the Wheel (170) counterclockwise until the desired height is acquired. Then, turn the Locking Knob clockwise to lock the Saw Blade in position. (See Figure M.)
To Adjust The Angle Of The Saw Blade:
1.The Table Saw is capable of making cuts from 90 degrees to 45 degrees.
2.The Table Saw also features an Angle Scale and Angle Indicator on the front side of the unit. (See Figure M.)
SKU 45804 | PAGE 14 |
