PRODUCT SPECIFICATIONS
ITEM | DESCRIPTION |
Electrical Requirements | 2 HP Motor /12 Volt /60 Hz |
| 13 Amps /3,600 RPM |
|
|
Blade Size Capacity | 10” Diameter / 5/8” Arbor (blade not included) |
Overall Dimensions | |
Table Dimensions | 26” W x |
Adjustable Rip Fence Size | |
|
|
Scale Measurement Increments | Inches / Metric |
Maximum Rip With Fence | |
Blade Adjustments | 90 Degrees to 45 Degrees |
Cutting Capacity | |
| |
Weight | 32.85 Lbs. |
Accessories Included: Fence Assembly, Blade Guard, Bottom Plate, Mitre Guide, Push Stick, Elevation Wheel Handle, 3 Hex Wrenches (4mm, 5mm, 6mm), 2 Spanner Wrenches
* NOTE: |
|
Recommended Blade (not included): | E194601 |
Item #529 - 10” M2 Molybdenum Tipped (40 Tooth) saw blade. |
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
SKU 45804 | PAGE |
REV 07j
