Enterasys Networks 9034313-07 manual Show multiauth station, Show multiauth session

show multiauth station

Mode

Switch command, read‐write.

Examples

This example shows how to clear the port multiple authentication mode on port ge.3.14:

C3(rw)->clear multiauth port mode ge.3.14

This example shows how to clear the number of users on port ge.3.14:

C3(rw)->clear multiauth port numusers ge.3.14

show multiauth station

Use this command to display multiple authentication station (end user) entries.

Syntax

show multiauth station [mac address] [port port-string]

Parameters

mac address	(Optional) Displays multiple authentication station entries for a specific
	MAC address.
port port‐string	(Optional) Displays multiple authentication station entries for one or more
	ports.

Mode

Switch command, read‐only.

Defaults

If no options are specified, multiple authentication station entries will be displayed for all MAC addresses and ports.

Example

This example shows how to display multiple authentication station entries. In this case, two end user MAC addresses are shown:

C3(rw)->show multiauth station

Port	Address type	Address
------------ ------------		------------------------
ge.1.20	mac	00-10-a4-9e-24-87
ge.2.16	mac	00-b0-d0-e5-0c-d0

show multiauth session

Use this command to display multiple authentication session entries.

Syntax

show multiauth session [all] [agent {dot1x mac pwa}] [mac address]

[port port-string]

SecureStack C3 Configuration Guide 26-43