Enterasys Networks 9034313-07 Show maclock stations, Show maclock Output Details, Firstarrival

				show maclock stations
------- -------	-------- -------	---------- ---------------		---------------
ge.1.1 enabled	disabled enabled	20	1	00:a0:c9:39:5c:b4

Table 26‐6 provides an explanation of the command output.

Table 26-6 show maclock Output Details

Output Field	What It Displays...
Port Number	Port designation. For a detailed description of possible port-stringvalues, refer to
	“Port String Syntax Used in the CLI” on page 7-1.
Port Status	Whether MAC locking is enabled or disabled on the port. MAC locking is globally
	disabled by default. For details on enabling MAC locking on the switch and on one or
	more ports, refer to “set maclock enable” on page 26-60and “set maclock” on
	page 26-61.
Trap Status	Whether MAC lock trap messaging is enabled or disabled on the port. For details
	on setting this status, refer to “set maclock trap” on page 26-67.
Aging Status	Whether aging of FirstArrival MAC addresses is enabled or disabled on the port.
	Refer to “set maclock agefirstarrival” on page 26-65.
Max Static Allocated	The maximum static MAC addresses allowed locked to the port. For details on
	setting this value, refer to “set maclock static” on page 26-63.
Max FirstArrival	The maximum end station MAC addresses allowed locked to the port. For details on
Allocated	setting this value, refer to “set maclock firstarrival” on page 26-64.
Last Violating MAC	Most recent MAC address(es) violating the maximum static and first arrival value(s)
Address	set for the port.

show maclock stations

Use this command to display MAC locking information about end stations connected to the switch.

Syntax

show maclock stations [firstarrival static] [port-string]

Parameters

firstarrival	(Optional) Displays MAC locking information about end stations first
	connected to MAC locked ports.
static	(Optional) Displays MAC locking information about static (management
	defined) end stations connected to MAC locked ports.
port‐string	(Optional) Displays end station information for specified port(s). For a
	detailed description of possible port‐string values, refer to “Port String
	Syntax Used in the CLI” on page 7‐1.

Defaults

If no parameters are specified, MAC locking information will be displayed for all end stations.

Mode

Switch command, read‐only.

SecureStack C3 Configuration Guide 26-59