Enterasys Networks 9034313-07 manual Set port negotiation, Show port advertise, Enable disable

set port negotiation

Mode

Switch command, read‐only.

Example

This example shows how to display auto‐negotiation status for 1‐Gigabit Ethernet port 14 in slot 3:

C3(su)->show port negotiation ge.3.14 auto-negotiation is enabled on port ge.3.14.

set port negotiation

Use this command to enable or disable auto‐negotiation on one or more ports.

Syntax

set port negotiation port-string{enable disable}

Parameters

port‐string	Specifies the port(s) for which to enable or disable auto‐negotiation. For a
	detailed description of possible port‐string values, refer to “Port String
	Syntax Used in the CLI” on page 7‐1.
enable disable	Enables or disables auto‐negotiation.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to disable auto‐negotiation on 1‐Gigabit Ethernet port 3 in slot 14:

C3(su)->set port negotiation ge.3.14 disable

show port advertise

Use this command to display port capability and advertisement as far as speed and duplex for auto‐negotiation.

Syntax

show port advertise [port-string]

Parameters

port‐string	(Optional) Displays advertised ability for specific port(s). For a
	detailed description of possible port‐string values, refer to “Port String
	Syntax Used in the CLI” on page 7‐1.

Defaults

If port‐string is not specified, advertisement for all ports will be displayed.

SecureStack C3 Configuration Guide 7-17