Enterasys Networks 9034313-07 manual Set sntp server, Clear sntp server

set sntp server

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to clear the SNTP client’s operational mode:

C3(su)->clear sntp client

set sntp server

Use this command to add a server from which the SNTP client will retrieve the current time when operating in unicast mode. Up to 10 servers can be set as SNTP servers.

Syntax

set sntp server ip-address [precedence]

Parameters

ip‐address	Specifies the SNTP server’s IP address.
precedence	(Optional) Specifies this SNTP server’s precedence in relation to its peers.
	Valid values are 1 (highest) to 10 (lowest).

Defaults

If precedence is not specified, 1 will be applied.

Mode

Switch command, read‐write.

Example

This example shows how to set the server at IP address 10.21.1.100 as an SNTP server:

C3(su)->set sntp server 10.21.1.100

clear sntp server

Use this command to remove one or all servers from the SNTP server list.

Syntax

clear sntp server {ip-addressall}

Parameters

ip‐address	Specifies the IP address of a server to remove from the SNTP server list.
all	Removes all servers from the SNTP server list.

14-32 Logging and Network Management